The ZS1149010 condensate separator is designed for screw compressors. Its primary function is to separate and drain the water generated during the condensation of compressed air. In operation, oil-emulsified condensate produced after the air compressor cooling enters the separator. The fluid first passes through a pre-filter to trap solid contaminants. The coalescing layer merges tiny oil droplets into larger oil beads that float upward into the oil collection chamber, while activated carbon adsorbs residual dissolved oil. Waste oil is collected periodically, and treated clean water that meets discharge standards is drained from the bottom for environmentally compliant discharge into the sewage network.
Recommendations for the ZS1149010 condensate separator:
- Installation Position It is recommended to install the unit after the air compressor outlet and air receiver, and before the dryer, serving as a pre-stage coarse condensate separator.
- Drainage Matching This model comes with an integrated automatic drain function. Nevertheless, the drain valve shall be inspected regularly to confirm unobstructed operation.
- Periodic Maintenance Check for oil sludge accumulation inside the separator to maintain separation efficiency. Replace sealing components promptly once aging occurs.
DFYLSYC-2026-11-20-A





