4TY0431 PAF primary air fan rotor slider

The 4TY0431 slider is a core wear part of the PAF primary air fan rotor. Driven by the hydraulic control cylinder through the control rod and yoke, the slider bears reciprocating sliding loads, transmits torque and drives the blades to synchronously adjust their mounting angles, so as to regulate the primary air volume and air pressure. After long-term operation, wear, increased clearance and jamming may occur, resulting in slow fan regulation, inconsistent blade opening and rising vibration. It is a mandatory replacement spare part during rotor overhaul, and is often used in combination and distinguished from 4TY0430 and 4TY0432-A1 sliders.

Technical Features

Material: High-hardness wear-resistant alloy with surface hardening treatment, impact-resistant and fatigue-resistant, suitable for the high-temperature and dust-laden working conditions inside the fan impeller chamber. High fitting accuracy and low friction coefficient, ensuring synchronous adjustment of multiple blades and preventing jamming of individual blades. Resistant to alternating loads, adapting to frequent blade pitch adjustment and variable-load operation of the fan. Non-standard drawing part, processed strictly in accordance with the original drawing number. Its dimensions and fit tolerances directly affect the linearity of moving blade adjustment.

Application Scenarios

Overhaul of rotors for PAF series adjustable moving-blade primary air fans and forced draft fans of coal-fired power station boilers. It is a commonly tendered maintenance spare part for 600MW and 700MW supercritical / ultra-supercritical units, and serves as a general replacement part for similar Shanggu axial flow fans.

Maintenance Notes

Inspect the wear condition of yoke chutes and adjusting trunnions at the same time during replacement. If the chute scoring exceeds the limit, corresponding treatment shall be carried out together. Keep the assembly clean and apply special high-temperature grease to prevent pulverized coal from entering the friction surface and accelerating wear. Calibrate the consistency of moving blade opening and perform rotor dynamic balance after replacement.

DFYLSYC-2026-11-20-A

Get a Quote