The J61Y-320C DN20 globe valve with a pressure rating of PN32MPa is a manually operated, welded high-pressure valve. It is installed on pipelines in power, metallurgy, chemical, petroleum and other industries to cut off or connect various media such as water, steam and oil products.
By rotating the handwheel, the threaded engagement between the handwheel and the valve stem lifts or lowers the disc connected to the stem to realize opening and closing. The closing member of the globe valve is a cylindrical disc with flat or conical sealing surfaces, and the disc moves linearly along the centerline of the fluid flow. This type of globe valve is designed for fully open or fully closed service and is generally not used for flow regulation. Custom versions can be supplied for throttling and flow adjustment upon request.
The globe valve is a forced-sealing valve. When closed, force must be applied to the disc to press the sealing surfaces tightly against each other and prevent leakage. Since the advent of self-sealing valves, the medium flow direction for globe valves has been changed to enter the valve cavity from above the disc. Under medium pressure, less force is required to close the valve while more force is needed to open it. The valve bonnet cavity adopts a pressure self-tightening sealing structure. The back seal is formed by a thread-connected sealing seat or overlay-welded austenitic stainless steel on the valve body, delivering reliable back sealing. Packing replacement and maintenance can be performed without system shutdown.
DFYLSYC-2026-11-20-A





