The SMCB-01-16L is a new type of speed sensor designed for power plant steam turbines, utilizing a magnetic-sensitive chip as its sensing element. It detects magnetic or magnetically permeable materials, such as iron and electrical steel. When the target object—featuring protrusions (or indentations) made of magnetically permeable material—rotates, the sensor outputs a pulse signal corresponding to the rotational frequency, thereby enabling speed measurement or displacement detection.
This sensor employs a three-wire connection method; it is easy to install and use, highly versatile, and widely applied across various industries. It offers unique advantages—particularly in low-speed or ultra-low-speed non-contact detection—that other sensors cannot match.
II. Technical Specifications
Operating Voltage: DC 12V (5–28V)
Response Frequency: 0.2 Hz – 10 kHz
Output Voltage: High level: approx. supply voltage; Low level: ≤0.7V
Gear Material: Steel or other magnetically permeable materials
Gear Thickness: ≥10mm
Output Waveform: Square wave
Output Type: PNP, NPN, or PNP/NPN universal
Protection: Reverse polarity, short circuit
Installation Gap: 1–2mm
Mounting Thread: M16×1 or other specifications
Protection Rating: IP65
Operating Temperature: -10 to 70°C (standard cable)
III. Selection Guide for SMCB-01-16L Speed Sensor (Power Plant Steam Turbine Magnetic Speed Probe):
1. Determine output polarity: PNP, NPN, or PNP/NPN universal
2. Determine stem length: 65mm, 80mm, 100mm, 120mm, 150mm, or other specifications
3. Determine thread specification: M10×1.0, M16×1.0, M18×1.0, 5/8-18UNF, or other specifications
4. Determine cable exit method: Aviation connector, integrated cable, or integrated armored cable
DFYLSYC-2026-09-11-A
