CQJ-16 nitrogen charging tool is an accessory of NXQ type accumulator, which can be used to charge and exhaust the accumulator, measure and correct the charging pressure. The charging tool has the advantages of compact structure, safety, reliability, high pressure bearing, impact resistance, convenient use, etc.
Pressure: 10Mpa
Connector Size: M14 × 1.5
Length: 1.5 meter
If there are special requirements for the tools, such as the connector size, length, etc. according to foreign standards, please contact in advance.
Precautions
1. The accumulator must be checked before filling the bladder with nitrogen.
2. Fill nitrogen slowly to avoid breaking the rubber bladder.
3. The accumulator cannot be filled with nitrogen, compressed air or other combustible gases.
